Pallet Storage Mode Specification
RightChain Pallets considers the full range of pallet storage modes in user-specified configurations including stacking systems including floor storage block stacking and stacking frames; static rack systems including single-deep pallet rack, double-deep pallet rack, and drive-in rack; and dynamic rack systems including push-back rack, pallet flow rack, shuttle-based systems, and mobile pallet rack. The configuration of each mode should be uploaded as a "Storage Mode Specifications" file. A template with default values is downloadable from the data input page.
Components of Pallet Rack
Pallet racking is a crucial component of warehouse storage systems, designed to optimize space and improve inventory management. Here are the key components of a typical pallet rack system:
​
1. Upright Frames: These are the vertical structures that support the rack system. They consist of two posts connected by bracing that can be either welded or bolted together. The height and depth of the upright frames determine the capacity and size of the racking system.
​
2. Load Beams: Also known as horizontal beams or cross beams, these are the components that connect the upright frames horizontally and support the pallets. They are typically made of steel and can be adjusted in height along the upright frames to accommodate different pallet sizes.
​
3. Pallet Supports: These are placed between the load beams to provide additional support to the pallets. They are especially necessary for heavy loads or weak pallets to prevent sagging or breaking.
​
4. Row Spacers: These are used to connect rows of pallet racks, providing uniform spacing and adding stability. They are particularly important in back-to-back row setups.
​
5. Column Protectors: These are installed at the base of the upright frames to protect them from damage by forklifts or other warehouse machinery. They are crucial for maintaining the structural integrity of the rack.
​
6. Floor Anchors: Upright frames are anchored to the floor to stabilize the racks against shifting or tipping. Proper anchoring is essential for safety and compliance with regulatory standards.
​
7. Wall Ties: In some installations, racks are secured to the wall for additional stability, using wall ties.
​